Primary Testing Solutions :
CIBANO 500
CIBANO 500 combines a micro-ohmmeter, timing analyzer, and a coil and motor supply. All important CB tests on all types of CBs can be carried out even when a station battery is not available.
Its globally unique connection technology reduces the wiring effort and time required up to 50 %. In addition, OMICRON's Primary Test Manager™(PTM)-Software and the included circuit breaker testing library (CBTL) ensure convenient operation and deliver one clear, combined report for all the tests performed.
CT Analyzer
How CT Analyzer works
Injects low test signals into secondary side of the CT
Determines the CT‘s equivalent circuit parameters
Identifies all relevant CT performance parameters
Displays all relevant parameters of the CT and its accuracy at different currents and burdens
Evaluates the CT according to the selected standard
Determines unknown CT nameplate parameters
Demagnetizes the CT after the test.
CPC 100
The patented CPC 100 primary injection test system replaces several individual testing devices. This reduces the costs for training and transport, and cuts down testing time. Therefore, the CPC 100 is the ideal test set for substation asset commissioning and maintenance. You can operate the CPC 100 via the integrated front panel, or by using the Primary Test ManagerTM (PTM) software on your laptop.
VOTANO 100
VOTANO 100 is the first portable device (15 kg/33 lbs) which offers highly accurate voltage transformer tests. This allows to use VOTANO 100 not only for electrical performance checks, but also for class verification and calibration. It performs quick tests of all kinds of inductive voltage transformers (VTs) and capacitive voltage transformers (CVTs) for both protection and metering purposes. Its light-weight design makes it ideal for on-site tests and calibration tasks in power system grids. As a manufacturer or testing lab you can use VOTANO 100 in your production facilities and test/development labs. The voltage booster VBO2 provides the test voltage during the ratio measurement. Its integrated switchbox automatically switches between the necessary test sequences.
FRANEO 800
More than a test device FRANEO 800 was developed for testing the mechanical and electrical integrity of power transformers after transportation or exposure to high fault currents. It uses the sweep frequency response analysis (SFRA) principle and measures the electrical transfer function over a wide range of frequencies. With our FRANEO 800 you can improve your transformer reliability, reduce maintenance costs and prevent expensive failures.
DIRANA
Easy determination of insulation’s condition DIRANA uses dielectric frequency response (DFR) analysis in order to determine the condition of high-voltage insulation systems such as those in power transformers, bushings, cables and generators. It automatically analyses and determines the water content and the oil conductivity in different types of cellulose insulation. You can test assets filled with mineral oil, natural and synthetic ester as well as air or vacuum. The measurement results are shown in categories defined by IEC 60422.
TESTRANO 600
Powerful and compact solution TESTRANO 600 is the world’s first portable, three-phase test system which supports all common electrical tests on single- and three-phase power and distribution transformers for routine and diagnostic testing on-site or during factory acceptance tests (FAT). Using TESTRANO 600 enables you to perform various tests on power transformers without re-connecting. Thus, TESTRANO 600 cuts testing time down to one third compared to conventional single-phase test sets.
Secondary Testing Solutions :
CMC 356
Powerful six-phase relay testing and more The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high-burden electromechanical relays with very high power demands. The CMC 356 is the first choice for applications requiring the highest versatility, amplitude and power. Commissioning engineers will particularly appreciate its ability to perform wiring and plausibility checks of current transformers, by using primary injection of high currents from the test set.
CMC 256plus
The reference for accurate signal requirements The CMC 256plus is the first choice for applications requiring very high accuracy. This unit is not only an excellent test set for protection devices of all kinds but also a universal calibrator. Its high precision allows the calibration of a wide range of measuring devices, including: energy meters of class 0.2, measuring transducers, power quality measurement devices and phasor measurement units (PMU). Its unique accuracy and flexibility make the CMC 256plus ideal for protection and measurement equipment manufacturers for research and development, production and type testing.
CMC 310
Simple and fast three-phase testing The CMC 310 is specifically designed for basic three-phase testing of protection and measurement devices. It is operated by the CMControl P software which runs on the CMControl P unit, a Windows PC or on an Android tablet. Its intuitive user interface and the test tools included are optimized for quick manual testing in the field. The lightweight and compact design makes the CMC 310 particularly suitable for testing distribution systems, as well as industrial or SCADA systems. If automated testing is requested, a CMC 310 can be upgraded to a CMC 353 at any time which then can be operated by the PC based Test Universe software.
CMC 353
Powerful three-phase relay testing With its compact design and low weight of 13.3 kg / 29.3 lbs, the CMC 353 provides the perfect combination of portability and power. It is the ideal test set for three-phase protection testing and the commissioning of SCADA systems. The powerful current outputs (3 x 32 A / 430 VA) optimally support 5 A relay testing. The portable design makes this test set an excellent choice for commissioning and maintenance tasks, particularly in industry, distributed generation, and medium and low voltage applications. The CMC 353 meets a wide variety of challenges in protection engineering – from testing electromechanical relays to the latest IEC 61850 IEDs.
CMC 430
The accurate, lightweight champion The CMC 430 is the preferred choice for test engineers in cases where excellent transportability is needed and three currents up to 12.5 A or six voltage outputs are sufficient. Its low weight of just 8.7 kg / 19.2 lbs, and robust design with its edge protection predisposes the device to every outdoor and indoor use. Typically, this device is most suitable in environments where numerical and communication based protection prevails. With this extraordinarily high precision, it is also an ideal source based calibrator for all kinds of measurement devices, such as energy meters, transducers, PQ meters, and PMUs.
COMPANO 100
COMPANO 100 is the universal and easy-to-use solution for all types of basic testing duties in electrical energy systems. Controlled electronic sources allow the user to obtain exactly the desired value and to output signals with variable frequencies and other signal forms, automated ramps, and pure DC. The highly flexible inputs are configurable, for example, as binary inputs for relay testing, AC or DC voltage inputs or current inputs.
Partial Discharge Solutions :
MPD 800
Reliable PD testing on electrical equipment Our MPD 800 universal partial discharge (PD) measurement and analysis system represents the next generation of our widely-used and innovative MPD PD testing technology. Enhanced and newly-added hardware and software features ensure highly-sensitive multi-channel PD measurements for reliable, industry-standard PD testing on a variety of electrical equipment and components. It accurately detects and localizes insulation defects and helps you to reliably assess the risk of equipment failure.
MONTESTO 200
Convenient 2-in-1 solution MONTESTO 200 is a portable, two-in-one solution that enables you to perform both on-line partial discharge (PD) measurements and temporary on-line PD monitoring: It can be used on various medium-voltage and high-voltage electrical assets under load to assess insulation condition. You can use the IP65 rated MONTESTO 200 both indoors and outdoors. Automated software features enable users to quickly and reliably identify and locate signal sources.